0%

To support safe and productive remote work in Croatia, WorkMotion ensures that Talents have IT equipment that meets local ergonomic and health and safety standards. This article outlines the required equipment, including guidelines for screens, keyboards, desks, and chairs, along with the inspection process to confirm compliance.

WorkMotion is committed to providing a safe and healthy working environment for Talents, as per the local health and safety regulations for IT equipment in Croatia. Statutory regulations ensure that Talents have the appropriate IT equipment that meets the ergonomic requirements for their well-being and productivity.

According to the current regulations, Talents must be provided with the following items (if they do not have their own already):

1. Screen

  • The screen's distance from the Talent's eyes must not be less than 500 mm, but again not so much that it creates difficulties for them when reading data from the screen. The image on the screen should be stable, without flickering or other instabilities. The screen stand must be movable and separate from the table.

  • The brightness and contrast on the screen must be adjustable so that the Talent can quickly adapt them to the conditions in the working environment.

  • The screen must be movable so that the Talent can adjust its direction and inclination to the ergonomic work requirements. It is necessary to ensure the possibility of adjusting the screen height to the height of the Talent's eyes so that they are at the height of the upper edge of the screen, the viewing direction is in the same plane or slanted downwards up to 20°.

2. Keyboard

  • The middle height of the keyboard must not exceed 30 mm, its height must not exceed 15°, and if its lower edge is higher than 15 mm, an extension is needed to support the hand. The keyboard must be freely movable over the entire work surface, allowing the Talent to hold their body and hands naturally. The keyboard's ability to move and adjust should not be limited by connection or cable length.

  • At least 100 mm of free space must be on the work table or surface in front of the keys to accommodate the Talent's hands.

  • The keyboard must not have a shiny surface.

  • The layout of the keys on the keyboard and the characteristics of the keys must correspond to ergonomic requirements.

3. Desk or work surface

  • The surface of the table or the work surface must not shine and must be spacious enough to accommodate the screen, keyboard, writing pads, and other equipment, and to have enough space to operate the mouse.

  • There must be enough free space under the table for comfortable sitting.

  • The desk or work surface must be stable and, if possible, adjustable in height.

  • The holder for templates must be stable and adjustable, and designed and placed so that it does not put additional strain on the eyes, neck, or head.

4. Work chair

  • The work chair must be stable, allowing the Talent a comfortable position and unhindered movement.

  • The height of the seat of the work chair must be adjustable.

  • The backrest must support the entire back, adjustable in inclination and height.

  • A footrest must be provided to every Talent who wants it. The footrest must be high enough and stable, allow a comfortable position of the feet and the inclination of the legs, and not have a slippery surface.

Our local Health and Safety vendor conducts thorough workplace inspections for all new Talents to ensure compliance with these health and safety regulations. If any discrepancies or deficiencies are identified, they will notify us immediately.

If such a situation arises, we will contact you promptly to share detailed information about the missing or incorrect items. This will allow you to take the necessary steps to provide your Talents with the appropriate equipment to meet ergonomic requirements.

Did we answer your query?